氯和紫外消毒过程中胞外抗性基因的产生特征

考察了城市污水氯和紫外消毒过程中不同物理形态的胞外抗性基因的产生行为与及微生物群落的关联特征.结果表明,氯消毒尽管使胞内抗性基因丰度下降,但使结合型胞外抗性基因丰度明显上升（0.7±0.1）log,而游离型胞外抗性基因丰度下降（0.2±0.1）log.紫外消毒也使胞内抗性基因下降,但使游离型胞外抗性基因显著上升（0.4±0.2）log,而结合型胞外抗性基因丰度下降（0.3±0.1）log.氯消毒后,结合型胞外DNA（a-eDNA）中变形菌门丰度下降而其他菌门的丰度上升,细菌多样性指数由4.2上升到4.7;而游离型胞外DNA（f-eDNA）中变形菌门上升了6.6%,多样性指数则从3.5降低到2.8.紫外消毒后,a-eDNA中变形菌门丰度下降了36.6%,多样性则上升到4.8,而f-eDNA中细菌丰度变化较小.分子生态网络分析揭示了抗性基因与细菌间广泛的寄存关系,tetA、tetX、sulI和sulII分别与17、15、15和5种菌属间存在共现性,表明抗性基因潜在宿主的变化是导致消毒后胞外抗性基因产生的关键原因.本研究表明氯和紫外消毒不能消除抗性基因风险,反而通过导致不同胞外抗性基因的大量产生,使风险的形式发生变化.     

饮用水中的消毒副产物及其控制策略

消毒副产物（disinfection by-products,DBPs）是在饮用水消毒时由消毒剂与有机或无机前体物反应生成的一类次生污染物,其由于具有致癌、致畸和致突变的三致特性在全球范围内广受关注.聚焦于饮用水中的DBPs,介绍了DBPs的主要分类和研究历程,汇总了多地饮用水中常见DBPs的浓度水平以及全球饮用水水质标准对DBP指标的管控要求.随后系统介绍了饮用水中DBPs的控制策略,包括源头控制、过程控制、末端控制以及协同控制这4大类,并对各类控制方法的优缺点进行了分析.评述了中国的DBPs研究的现有水平和未来趋势,并展望了未来有关DBPs控制方法的研究方向.一方面,在评价某种工艺或技术对DBPs的控制效果时需要考虑DBPs浓度和水质综合毒性的变化,另一方面,建议关注耦合源头、过程和末端控制技术的协同控制方法,兼顾从源头到龙头每个节点,实现对饮用水中各类DBPs的高效控制.     

紫外消毒在城市污水处理中的研究进展

介绍城市污水消毒的必要性,对常用污水消毒技术进行现状分析及技术经济比较,紫外线消毒有望成为替代传统液氯消毒的较佳选择.阐述紫外线消毒原理及工程上的应用.最后对紫外消毒技术进行总结.     

污水氯、二氧化氯消毒处理中水质及毒性变化的比较

分别从水质和毒性2方面比较了氯、二氧化氯消毒对污水的影响.结果表明:在水质特性方面,氯消毒对污水色度影响不大,而二氧化氯消毒明显降低了污水的色度;氯、二氧化氯消毒前后污水的DOC基本没有变化;氯消毒后污水的UV₂₃₀明显增加,二氧化氯消毒后污水的UV₂₃₀略有降低,当二者投加量均为30mg/L时,氯消毒使污水的UV₂₃₀增加约0.7cm^-1,二氧化氯消毒使污水的UV₂₃₀降低约0.05cm^-1.在毒性生成方面,氯、二氧化氯消毒产生的急性毒性均随消毒剂投加量的增加而增大,氯消毒产生的急性毒性明显高于二氧化氯消毒;氯消毒在一定程度上增大了污水的遗传毒性,而二氧化氯消毒在一定程度上降低了污水的遗传毒性.     

三氯乙醛前驱物的筛选及其生成影响因素探讨

选取苹果酸、酒石酸、柠檬酸、色氨酸、组氨酸、酪氨酸代表自然界中低分子量的有机酸和氨基酸,实验室模拟氯化,GC/MS确证了氯化产物中的三氯乙醛,GC-ECD定量测定了氯化产物中三氯乙醛的浓度,筛选了生成三氯乙醛主要前驱物,并进一步探讨了各种因素对三氯乙醛形成的影响。     

A photolysis coefficient for characterizing the response of aqueous constituents to photolysis

UV photolysis and UV based advanced oxidation processes (AOPs) are gaining more and more attention for drinking water treatment. Quantum yield (ø) and molar absorption coefficient (ε) are the two critical parameters measuring the effectiveness of photolysis of a compound. The product of the two was proposed as a fundamental measure of a constituent’s amenability to transformation by photolysis. It was shown that this product, named the photolysis coefficient, k _p , can be determined using standard bench tests and captures the properties that govern a constituent’s transformation when exposed to light. The development showed the photolysis coefficient to be equally useful for microbiological, inorganic and organic constituents. Values of k _p calculated by the authors based on quantum yield and molar absorption coefficient data from the literature were summarized. Photolysis coefficients among microorganisms ranged from 8500 to more than 600000 and are far higher than for inorganic and organic compounds, which varied over a range of approximately 10 to 1000 and are much less sensitive to UV photolysis than the microorganisms.     

Removal of organic matter and disinfection by-products precursors in a hybrid process combining ozonation with ceramic membrane ultrafiltration

The performance of an integrated process including coagulation, ozonation, ceramic ultrafiltration (UF) and biologic activated carbon (BAC) filtration was investigated for the removal of organic matter and disinfection by-products (DBPs) precursors from micro-polluted surface water. A pilot scale plant with the capacity of 120 m³ per day was set up and operated for the treatment of drinking water. Ceramic membranes were used with the filtration area of 50 m² and a pore size of 60 nm. Dissolved organic matter was divided into five fractions including hydrophobic acid (HoA), base (HoB) and neutral (HoN), weakly hydrophobic acid (WHoA) and hydrophilic matter (HiM) by DAX-8 and XAD-4 resins. The experiment results showed that the removal of organic matter was significantly improved with ozonation in advance. In sum, the integrated process removed 73% of dissolved organic carbon (DOC), 87% of UV₂₅₄, 77% of trihalomethane (THMs) precursors, 76% of haloacetic acid (HAAs) precursors, 83%of trichloracetic aldehyde (CH) precursor, 77% of dichloroacetonitrile (DCAN) precursor, 51% of trichloroacetonitrile (TCAN) precursor, 96% of 1,1,1-trichloroacetone (TCP) precursor and 63% of trichloronitromethane (TCNM) precursor. Hydrophobic organic matter was converted into hydrophilic organic matter during ozonation/UF, while the organic matter with molecular weight of 1000–3000 Da was remarkably decreased and converted into lower molecular weight organic matter ranged from 200–500 Da. DOC had a close linear relationship with the formation potential of DBPs.     

Disinfection byproducts in drinking water and regulatory compliance: A critical review

Disinfection by-products (DBPs) are regulated in drinking water in a number of countries. This critical review focuses on the issues associated with DBP regulatory compliance, including methods for DBP analysis, occurrence levels, the regulation comparison among various countries, DBP compliance strategies, and emerging DBPs. The regulation comparison between China and the United States (US) indicated that the DBP regulations in China are more stringent based on the number of regulated compounds and maximum levels. The comparison assessment using the Information Collection Rule (ICR) database indicated that the compliance rate of 500 large US water plants under the China regulations is much lower than that under the US regulations (e.g. 62.2% versus 89.6% for total trihalomethanes). Precursor removal and alternative disinfectants are common practices for DBP regulatory compliance. DBP removal after formation, including air stripping for trihalomethane removal and biodegradation for haloacetic acid removal, have gained more acceptance in DBP control. Formation of emerging DBPs, including iodinated DBPs and nitrogenous DBPs, is one of unintended consequences of precursor removal and alternative disinfection. At much lower levels than carbonaceous DBPs, however, emerging DBPs have posed higher health risks.     

Haloacetic acids in swimming pool and spa water in the United States and China

The objective of this study is to investigate the occurrence of haloacetic acids （HAAs）, a group of disinfection byproducts, in swimming pool and spa water. The samples were collected from six indoor pools, six outdoor pools and three spas in Pennsylvania, the United States, and from five outdoor pools and nine indoor pools in Beijing, China. Five HAAs （HAA5）, including monochloroacetic acid, dichloroacetic acid, trichloroacetic acid, monobromoacetic acid, and dibromoacetic acid were analyzed. Total chlorine, pH and total organic carbon concentration were analyzed as well. Results indicated that the levels of HAA5 in swimming pools and spas in the United States ranged from 70 to 3980μg·L^-1, with an arithmetic average at 1440μg·L^-1 and a median level at 1150μg·L^-1. These levels are much higher than the levels reported in chlorinated drinking water and are likely due to organic matters released from swimmers＇ bodies. The levels of HAA5 in swimming pools in China ranged from 13 to 332μg·L^-1, with an arithmetic average at 117μg·L^-1 and a median level at 114μg·L^-1. The lower HAA levels in swimming pools in China were due to the lower chlorine residuals. Results from this study can help water professionals to better understand the formation and stability of HAAs in chlorinated water and assess risks associated with exposures to HAAs in swimming pools and spas.     

再生水消毒副产物的检测、生成与控制

在水资源紧缺的当下,污水再生利用是一项重要的环保战略更是资源战略.消毒能有效杀灭病菌和阻断介水疾病的传播,是保障再生水用水安全的重要手段.然而,消毒剂会不可避免地与水中有机物发生反应形成具有毒害效应的消毒副产物.围绕污水在再生消毒过程中所产生的消毒副产物,针对其检测识别方法、生成条件（前体物、消毒工艺及水质条件对消毒副产物生成的影响）以及控制方法（源头控制、过程控制及末端控制）进行综述.在此基础上,对再生水消毒副产物的未来研究动态进行了探讨,可为保障再生水的安全利用提供依据.